ś Smart Garage Door Controller Gd00Z-8-Cg – Glow Security

Smart Garage Door Controller Gd00Z-8-Cg

$179.99

-

The GoControl Garage Door Opener Remote Controller (Z-Wave) pairs with your existing automatic garage door opener to provide remote opening and closing control via your Z-Wave network and controller. When installed, you can open and close your garage door from anywhere.

SKU: GC03401-0001 Categories: , ,

Description

Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device

Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products

Garage door position sensor frequency: 345 MHz ; Certifications FCC ETL UL 325

This product requires the use and pre-installation of a Z wave HUB.

Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door

Easy to install and use

Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device

Provides both audible and visual warnings prior to door movement

Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products

Specifications – Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz

 

Enables remote operation of a sectional garage door.

Provides loud audible and bright visual warnings before remote operation.

Tilt sensor reports door’s position to Z-Wave controller.

Acts as repeater to extend Z-Wave network reach.

Compatible with all Z-Wave-certified devices.

From Nortek, the #1 provider of smart Z-Wave products*.

 

The GoControl Garage Door Opener Remote Controller (Z-Wave) pairs with your existing automatic garage door opener to provide remote opening and closing control via your Z-Wave network and controller. When installed, you can open and close your garage door from anywhere. The garage door controller’s audible and visual warnings will alert those nearby of the door’s impending movement. The included tilt sensor attaches to the door to report its open or closed status to the Z-Wave controller. The Remote Controller also works as a repeater for your Z-Wave network, extending it up to an additional 130 feet (via line of sight).

 

Remote Control of Your Sectional Garage Door

As a part of your Z-Wave network, the GoControl Garage Door Opener Remote Controller (Z-Wave) provides remote opening and closing of a sectional garage door by pairing with almost any automatic garage door opener. Once installed and paired with the door’s existing opener, the Remote Controller provides both audible and visual warnings before opening or closing the door, meeting UL 325-2010 safety requirements.

 

Tilt Sensor Reports Door Position to Z-Wave Controller

The Remote Controller system’s wireless tilt sensor attaches to the inside of the garage door. Once installed, it reports the door’s open or closed status to the Z-Wave controller, which is then displayed on most Z-Wave controller apps.

 

Compatibility

The Garage Door Opener Remote Controller is never to be installed or used in conjunction with garage door openers manufactured prior to 1993 (models without an operational safety beam entrapment detection system).

 

Works as a Repeater for Your Z-Wave Network

For the Remote Controller device to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater. However, this device also works as a repeater, extending your network up to an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

 

Specs

  • Power: 120VAC, 50/60 Hz
  • Garage door position sensor frequency: 345 MHz
  • Z-Wave Frequency: 908.42 MHz

Z-WAVE SPECIFICATIONS

  • Range: Up to 130 feet between the wireless controller and/or the closest Z-Wave receiver module
  • Network inclusion
  • Scene: Command class
  • S2 Security compatible

CERTIFICATIONS

  • FCC
  • ETL

INCLUDED ACCESSORIES

  • Power supply 120VAC / 60Hz to 12VDC
  • Garage door tilt sensor
  • Mounting bracket and hardware

DIMENSIONS

  • Controller – W x H x D (Inches): 6.94 x 1.38 x 5.0
  • Tilt sensor – W x H x D (Inches): 1.69 x 0.88 x 1.19

Warranty: 1 year

0

Your Cart