Description
An outdoor camera enhances home and small business security, and keeps an eye on kids (or pets) in the yard. VistaCam 1102 is a rugged outdoor camera delivering full-HD 1080p video to clearly see faces, cars, and other fine details. Sets up quickly with simple, one-cable hookup to the nearest indoor power outlet. Place VistaCam 1102 at an entrance, or garage, deck, porch, parking area or other location at your home or business. Infrared night vision plus day/night sensor lets you see in total darkness. View anywhere on phone, tablet or browser.
Simple Outdoor Power Solution
Getting power to an outdoor camera can be tricky. Batteries would require changing every day or two. Power over Ethernet (PoE) brings power to the camera over the same cable that connects it to the supplied Wi-Fi adapter. Plug the Wi-Fi/PoE adapter into any outlet and run one single, standard Ethernet cable from the adapter to the camera.
Get VistaCam 1102 For Your Home Today
Watch your kids while they’re playing. See who is knocking on the door. See when cars pull up. Put several around your home or small business to keep an eye on everything. VistaCam 1102 is the versatile, weather-resistant camera that works anywhere you need to watch what’s going on outdoors.
Features:
Full HD video (1080p) shows fine details in recordings and still images
Motion detection automatically triggers recording
Built-in IR LEDs provide night illumination to see in total darkness
Wide 140-degree field of view monitors a large area at once
Power over Ethernet (PoE) enables locating camera up to several hundred feet from nearest AC outlet (16-foot cable included)
Weatherproof IP66 Case for outdoor use in all climates
Built-in Microphone for clear Audio with Video
Video streaming with H.264 and MJPEG compression for high-quality video recording and viewing
Built-in Backup Memory (8-GB) records video even when internet service goes out (and uploads automatically when service is restored)
Simple Installation using one cable
Install Your Outdoor Home Security Camera
Once you are ready to install your VistaCam 1102 full HD weatherproof camera, there are just a few simple steps to follow. You can either setup your camera by mounting and installing it or by doing so wirelessly. Remember, if you plan on setting up your device wirelessly, instructions will vary based on the type of of Vera controller that you have. Following the simple required steps, you can install your home security weatherproof device in a short number of minutes.
Sensor and Lens
Image Sensor: 4 megapixel 1/3″ CMOS Sensor
Minimum Illumination: 0 Lux (with IR LED)
Lens: Fixed Focus Lens, Aperture: F2.0
Field of View: 140°
Day/Night Sensor: Auto switch to night @ 1 lux; auto switch to day @ 3 lux
Night Vision: 2 High-power IR LEDs; Range: 5m
Video
Video Compression: H.264 Main Profile, M-JPEG
Video Backup Memory: 8GB
Video Streaming: Simultaneous H.264, M-JPEG, 3GPP Compatible
Resolution and Frame Rate: 1080p(1920×1080), 720p(1280×720), VGA(640×480), QVGA(320×240), QHD(640×360) up to 30 fps
Audio
Built-in Microphone (- 40 dB + 3dB), G.711, G.726, LPCM
Network
Protocols: TCP/IP, HTTP, HTTPS, DHCP, FTP, uPnP, NTP, RTCP, DNS, RTSP
Wireless: Supplied RP131 Wireless PoE Adapter supports IEEE 802.11 b/g/n Wi-Fi Connectivity
Dimensions
4mm x 74mm x 30mm (2.91 ” x 2.91″ x 1.18″)(HxWxD)
Operating Environment
Temperature: -20° – 50°C (-4° -122°F); Humidity: 30% – 85% RH (non-condensing)
Fit for Outdoor Use
Certifications
CE, FCC, UL
System
CPU: ARM-Cortex A9, 816MHz
Flash: NAND Flash 128MB
RAM: DDR3 512MB
Power Supply
PoE: IEEE 802.3af Power over Ethernet
Supplied Accessories
5M 8P8C Cable, Stand, RJ45 Rubber Hood, RP131/RP131+ – Wireless PoE Adapter
Warranty: 1 year
